1-Features
1.High Efficiency and good price
2.Built-in EMI filter
3.100% full load burn-in test
4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit
6.3 years warranty
2-Specifications
MODEL |
S-60-5 |
S-60-12 |
S-60-15 |
S-60-24 |
|
OUTPUT |
DC VOLTAGE |
5V |
12V |
15V |
24V |
RATED CURRENT |
12A |
5A |
4A |
2.5A |
|
CURRENT RANGE |
0 ~ 12A |
0 ~ 5A |
0 ~ 4A |
0 ~ 2.5A |
|
RATED POWER |
60W |
60W |
60W |
60W |
|
RIPPLE & NOISE (max.) |
120mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
|
VOLTAGE ADJ. RANGE |
4.75 ~ 5.5V |
10.8 ~ 13.2V |
13.5 ~ 16.5V |
21.6 ~ 26.4V |
|
VOLTAGE TOLERANCE |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
|
LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
LOAD REGULATION |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
|
SETUP, RISE TIME |
300ms, 50ms, /230VAC 800ms, 50ms/115VAC at full load |
||||
HOLD TIME |
90ms/230VAC 12ms/115VAC at full load |
||||
INPUT |
VOLTAGE RANGE |
85~132VAC/170~264VACselected by switch |
|||
FREQUENCY RANGE |
47 ~ 63Hz |
||||
EFFICIENCY (Typ.) |
80% |
85% |
85% |
86% |
|
AC CURRENT |
2A/115VAC 1A/230VAC |
||||
INRUSH CURRENT (max.) |
COLD START 20A/115VAC 40A/230VAC |
||||
LEAKAGE CURRENT |
<3.5mA / 240VAC |
||||
PROTECTION |
OVERLOAD |
105 ~ 150% rated output power |
|||
Protection type : Hiccup mode, recovers automatically after fault condition is removed. |
|||||
OVER VOLTAGE |
5.75 ~ 6.75V |
13.8 ~ 16.2V |
17.25 ~ 20.25V |
27.6 ~ 32.4V |
|
Protection type : Hiccup mode, recovers automatically after fault condition is removed. |
|||||
ENVIRONMENT |
WORKING TEMP. |
-10 ~ +60°C (Refer to output load derating curve) |
|||
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
||||
STORAGE TEMP., HUMIDITY |
-20 ~ +85°C ,10 ~ 95% RH |
||||
TEMP. COEFFICIENT |
±0.03%/ (0 ~ 50) |
||||
VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
||||
SAFETY & EMC |
SAFETY STANDARDS |
Desgin refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved |
|||
WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
||||
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
||||
EMS |
EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved |
||||
OTHERS |
MTBF |
316.2K hrs min. MIL-HDBK-217F (25) |
|||
DIMENSION |
159*97*38mm (L*W*H) |
||||
PACKING |
0.48Kg; 40pcs/20Kg |
||||
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. |
||||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
|||||
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
|||||
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |